Lifetime Warranty Lifetime Warranty Made in the USA Made in the USA FREE Shipping on $250+ Free Shipping on all orders $250+!

80 Lower Jig Spotlight: Easy Jig Gen 2 Multi Platform with Tooling (AR-9/AR-15/LR-308)

80 lower jig technology has come a long way over the years and yet, at the core of this process is always the same thing. Namely, a freedom loving patriot looking to take their 2nd Amendment liberty into their own hands. Fortunately for that patriot, building an AR with an 80 percent lower has never been easier. We’d say modern 80 lower jigs have made the process so easy a caveman could do it if that were not such an affront to cavemen.

With that being said, let’s take a closer look at one of these fine tools of American craftsmanship. The Easy Jig Gen 2 Multi Platform with Tooling is a masterpiece and it deserves the attention and praise we are about to lavish upon it.

80 Lower Jig Versatility at its Finest

The first of many fine qualities this 80 lower jig possesses would be its stunning versatility. With this platform, you can finish an 80 percent lower for not only the AR-15, but the AR-9 and the LR-308 as well. We know that American gun owners follow the mantra of why own one gun when you can own many. Despite being roughly 5% of the world’s population, we own about 42% of the world’s civilian guns.

Personally I think we need to pump those numbers up a bit, but that’s what again makes this 80% lower jig fantastic. You don’t need to purchase a new jig for every new gun and you can easily work the AR-15, AR-9 and LR-308 of this same platform. So buy your 80 lowers in bulk and build as often and with as much variety as your heart desires.

Less Tools Required with an 80 Lower Jig

You may have assumed that you need a drill press to complete an 80 lower receiver and if you were living in the past this would most certainly be so. However, the Easy Jig Gen 2 is so intuitive and easy to use this is no longer so. This 80 lower jig also comes with a handy buffer tube attachment. Not only does it help center and line up the 80 lower, but you can attach a shop vac to the end of it to suck up all the bits of aluminum that would otherwise be flying around.

This makes clean up a breeze and just a little added perk. We do recommend that you purchase a can of compressed air as milling on a clean smooth surface creates a better end product. This might also be a good time to note that we guarantee all of our products with a no fuss 100% warranty. Throw in the fact that they are also 100% American made and you’ve got yourself a winner.

This 80 Lower Jig is Crazy Fast

Finally, we just want to point out that this 80% lower jig is freakishly fast. An experienced builder can complete an 80 lower in the 30 minutes or less. There is 90% less drilling than most competing jigs and there is no disassembly of the jig to remove the completed 80 lower and get to work on another. We do want to emphasize though that if this is your first time to complete an 80 lower then we recommend you take your time and enjoy the process.

We sell a variety of jigs and products here at, but this Easy Jig Gen 2 Multi Platform is certainly a crowd favorite. However it is that you decide to pew we’ve got something for you. The 2nd Amendment is a lifestyle that deserves the finest and we are happy to do our part to continue to gift liberty to the masses.


Get exclusive discounts on AR-15 gear and be the first to know about new product releases.

100% Satisfaction

Customer Service is our passion and we are here to answer any questions you have.

Shop With PRIDE

Shop With Confidence

Secure Payment

Left Menu IconMENU
Right Menu Icon