GLOCK® Compatible 80% Frame Jig

GLOCK® Compatible 80% Frame Jig

The Glock®-compatible 80% frame-and-jig kits provide an affordable alternative to buying a Glock® handgun. Under federal law, you may legally fabricate a firearm for personal use without a license or background check, and without having to visit an FFL. These 80% kits make the process easy enough for anybody to complete without gunsmithing knowledge or special tools. Kits are available which work with most Gen3 series of Glock® pistols.

Frame, Jig and Glock® Pistol Compatibility

  • PF940C is compatible with Glock 19, G23, and G32 handguns.
  • PF940v2 is compatible with Glock 17, G22, G24, G31, G34, and G35 handguns.
  • PF940SC is compatible with Glock 26, and G27 handguns.

Frames are available in black, OD green, and desert tan.

Completing Your P80 Frame with The Jig

Fabricating your frame to make it a functional firearm requires a Dremel, hand drill, hand files, and a simple vise to secure the assembly in place while you work. Written and visual instructions are provided to assist with the fabrication steps, which involve:

  • Cutting the slide rails 
  • Cutting the barrel seat
  • Drilling the parts kit's pin holes

These steps, combined, will take first-time builders approximately 30 minutes to one hour. Once finished, your Glock®-compatible frame will interface with your chosen parts kit, or any factory or aftermarket Glock® parts you choose to use to build your custom handgun. Your 80% frame comes with a stainless steel locking block rail system and stainless steel rear rail module for installing the trigger housing mechanism, slide, and barrel. Also included is a blank serialization plate if you prefer (or are required by state law) to serialize your finished firearm.

80% Frame/Jig Features:

  • Doesn't require an FFL to buy or own
  • 80% frame includes jig and drill bits
  • Compatible with all Gen 3 Glock® parts
  • Constructed of high-strength polymer
  • Stainless-steel Locking Block Rail System (LBRS)
  • Stainless-steel Drop-in Rear Rail Module (RRM)
  • Includes blank serialization plate

State Laws May Vary

Contrary to federal law, some states have either restricted or banned the sale, transfer, and ownership of 80% lowers, firearm blanks, and other gun parts. Because of these restrictions, we cannot ship our products to certain states. Please confirm whether your state is restricted on our Shipping & Return Policy before placing an order. We cannot fulfill orders to restricted states if placed.

Now get to buildin'.

 


DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.

Compare Selected

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.