Gun cleaning kits and solvents for AR rifles and pistols, and handguns.
Leave a bore unswabbed or put your gun away dirty, and you'll come back to some ruined rifling and tarnished receivers and barrels. It's incredibly important to properly clean, oil, and store your firearms after shooting. Check out our selection of full gun cleaning kits (like the convenient Ammo Can Cleaning Kit) and the hugely popular Bore Boss roll-up bores nakes, available for 5.56/.223 and .40-cal handgun cartridges. Prefer a traditional cleaning rod setup? Try the Delta Series Compact AR Cleaning Kit. It includes all the brushes and tips required to keep your bore and barrel shiny.
Some solvents advertise great results with cheap prices. That's because they use incredibly high concentrations of corrosive acids and other chemicals. While these do wonders for removing fouling inside your gun, they can also destroy steel, aluminum, and polymer. That's why we chose to partner with Hoppe's . Their HBC6 Black Bore Cleaning Solvent provides great results without the corrosive side effects and risk of damage to your rifling or receiver/action. Although affordable, it's safe and effective. It's aerosol, so you won't waste a ton of product with every cleaning. Prefer a traditional cleaning oil that's great at removing copper? Try Hoppe's Black Copper Cleaner instead.
A bore snake is arguably the most effective - and quickest - way to clean any firearm bore and barrel. Using a thick, woven end containing bristles, a bore snake can be threaded and pulled through the entire length of the barrel. It provides the most contact and surface area per pass, removing virtually all fouling and carbon when used in tandem with a good cleaning solvent. A bore snake like the Bore Boss Ultra-Compact can clean your AR-15's barrel in under 3 minutes.
Since we cater to Poylmer80 and 1911 builders, we sought out quality, affordable handgun cleaning kits like the Vision Series Kit, for any handgun caliber between .38 and .45. Or grab the Black Cleaning Kit by Hoppe's and you'll have every swab, brush, and rod necessarily to clean any rifle or handgun in most calibers.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At AR-15LowerReceivers.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.
We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.