REAL TIME INVENTORY. NO BACKORDERS. Ships within 1 - 3 Business Days!

36 of 96 Items
36 of 96 Items

U.S.-made handgun parts for Polymer80 and 1911.

Ready to build a custom GLOCK-compatible P80 handgun or 1911 from scratch? Now you can! We have a quality selection of US-made components including GLOCK-compatible 80% frames from Polymer80 and custom, lightweight 1911 80% frames! Frames are available with the required 80% jig and tooling to cut and drill each unit, making it ready for a slide, barrel and parts kit.

P80 Handgun Parts

Polymer80's frames are GLOCK-compatible with all Gen3 components. Your build starts with a Polymer80 frame, which includes the jig and tooling for fabrication. Once fabricated, you can select a GLOCK-compatible parts kit to complete your build. You can opt for a custom slide, too! We've sourced a quality selection of GLOCK slides that include unique coatings and lightweight designs.

How to Complete a P80 Pistol Frame: The Guide.


1911 Handgun Parts

New, lightweight aluminum 1911 80% frames make fabricating your custom .45 or 9mm even easier. You get to pick a Government-spec (5") frame that's guaranteed to work with virtually all retail 1911 parts. Frames are available with a black anodized or bead-blasted finish, with or without an under-barrel Picatinny rail. Pair your frame with the Stealth Arms 1911 Jig to make it ready for assembly. Once fabricated, you can install any 1911 barrel, slide, and parts kit!

How to Complete an 80% 1911 Frame: The Guide.


DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither AR-15LowerReceivers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.