Polymer 80% lowers and frames are the newest, easiest way to build a factory-spec handgun or polymer AR-15 at home. These receiver blanks are lightweight but tough, and 100% compatible with their weapon platform's retail parts. That makes customization affordable and easy.
Polymer80 Parts Kits
Polymer80 parts kits are compatible with these P80 pistol frames. Select one of the available 80% frame based on its factory Glock handgun and parts kit's compatibility:
- PF940C is compatible with Glock 19, G23, and G32 handguns.
- PF940v2 is compatible with Glock 17, G22, G24, G31, G34, and G35 handguns.
- PF940SC is compatible with Glock 26, and G27 handguns.
Completing each frame or receiver requires drilling a few holes and removing excess polymer material using the included bits. These steps can be completed with basic hand tools (all you need is a vise, a Dremel, and some files). Little to no experience is required, thanks to easy-to-follow instructions! Once completed, simply pair your pistol frame with the appropriate Gen 3 Glock® barrel, slide, and parts kits, and hit the range in a single day.
Pistol Kit Features & Specs
- Can be fabricated with simple hand tools
- Compatible with all Gen 3 Glock® parts
- Constructed of high-strength polymer
- Stainless-steel Locking Block Rail System (LBRS)
- Stainless-steel Drop-in Rear Rail Module (RRM)
- Includes blank serialization plate
Polymer80 AR-15 and .308 80% Lowers
We're also excited to introduce polymer 80% lower receiver options for the AR-15 (5.56/.223) and .308 (DPMS Gen 1, LR-308)! If you've been wanted to shed weight and build the lightest AR-15 or .308 rifle possible, you've in the right place.
These polymer lowers weigh just 0.3 pounds. Once assembled, they reduce weight by around 50% compared to traditional aluminum receivers! Our friends over at Polymer80 took the time to ensure these lowers are capable of handling high-powered rifle rounds. Many customers have already built their black rifle or pistol using polymer, to great effect.
Polymer80 Features and Specs:
- Works with all mil-spec AR-15 parts
- Easier to machine than an aluminum receiver
- .308 lowers compatible with DPMS LR-308 platform
- Made of high-strength, reinforced polymer
Federally Legal to Buy and Build
Polymer80's frames and lowers are not considered firearms under federal law. The ATF Recognizes these units as receiver blanks, defined as un-fabricated and non-functioning firearm parts. They do not require an FFL to buy or own, nor do they require a background check under federal law. Contrary to federal law, some states have either restricted or banned the sale, transfer, and ownership of 80% lowers, firearm blanks, and other gun parts. Because of these restrictions, we cannot ship our products to certain states. Please confirm whether your state is restricted on our Shipping & Return Policy before placing an order. We cannot fulfill orders to restricted states if placed.
Your custom build awaits.
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
DISCLAIMER: If you are new to the world of DIY gun building, you likely have a lot of questions and rightfully so. It’s an area that has a lot of questions that, without the correct answers, could have some serious implications. At 80-lower.com, we are by no means providing this content on our website to serve as legal advice or legal counsel. We encourage each and every builder to perform their own research around their respective State laws as well as educating themselves on the Federal laws. When performing your own research, please be sure that you are getting your information from a reliable source.