1911 Frame and Jig Bundle - 9mm (5" Government, Tactical Frame, Anodized Black)

$493.75
$395.00
SKU:
1911F-9MGTAB_PHANTOM-JIG

Description

You love the 1911, but you want to have one built your way, in 9mm, with a tactical rail for mounting a light or laser, and with all the customizations you've been dreaming up lately.  Finally, you can with the Stealth Arms 1911 Phantom Jig and 80% Frame Bundle.  Install the jig pieces around the frame and get to work all without the need for a milling machine.  It's so fast and easy, you'll love it and then wonder why you didn't finish your own 1911 sooner.

The 1911 Jig Overview:

The 1911 Phantom Jig consists of 3 main pieces; 1 cutting “car” and 2 long side plates. Carbides cutters are used to remove the material from the frame, the Phantom Jig is the only jig that utilizes these powerful cutters. The carbide cutters will be used to cut the slide as well as the barrel set in the frame.

The 2 long side plates act as a guide for the cutting “car” to do its job. When the frame is installed in between the long side plates, the cutting car is then placed on top of your 2 longer side plates, at this point, the carbide cutter will be facing towards your 1911 frame side rail. To cut the rail you will just begin by working the carbide cutter back and forth, it is a more manual task but the best method for cutting these rails. The carbide cutter protrudes slightly and shaves layer after layer until your rail is complete, at that point you would flip the frame over and finish the other side.

BENEFITS OF THE 1911 PHANTOM JIG:

  • The quickest way to finish a 1911 frame
  • No need for a milling machine
  • All necessary drill bits included
  • Carbide cutters come installed
  • YouTube video tutorials available onlone
  • Compatible with all 1911 Stealth Arms frames
  • Made in the US (OHIO)

The 1911 Frame Overview:

The 9MM Government Tactical 1911 80% Frames are CNC-Machined using 7075 heat treated aluminum. We construct our 1911 80% frames from aluminum to cut down on the weight which results in a frame 60% lighter than a steel 1911 frame. Using a lightweight frame allows for practical everyday carry situations.

Another benefit to an aluminum 1911 80% frame is the ease of finishing the frame, a steel frame can leave builders frustrated and greatly increases the time of your build. Whether you are finishing your 1911 frame with a handheld jig, drill press, or milling machine an aluminum frame will save you time in the end.

The 1911 frames are only 80% completed which allows us to ship them directly to your door, NO FFL REQUIRED. Once the 80% frame is completed it is now by definitely a firearm, at this point it falls into the legal definition of a firearm. If it is legal for your to own a firearm, then it is 100% legal for you to build your own firearm.

Operation to be Completed

  • Cutting the side rails
  • Cutting the barrel seat
  • Drilling the hammer pin hole
  • Drilling the sear pin hole 1911

80% Frame Features

  • Low Profile Picatinny Tactical Rail
  • Manufactured to be used with a 5” barrel
  • Constructed from 7075 heat treated aluminum
  • 60% lighter than steel 1911 Frames
  • NO FFL Required to purchase
  • MADE IN THE USA (OHIO)

Special Notes:

  • If using a steel 1911 frame we recommend purchasing some extra carbide cutters as steel is a tough metal than aluminum.
  • We recommend every individual to do their own research regarding building your own firearm. We are not lawyers so please educate yourself on your state and local laws.
No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.