AR-15 Upper Assembly - .223 Wylde (16" Stainless Barrel & 13.5" M-Lok Handguard, 1:7 Twist)

$469.99
$399.99
SKU:
2231617(SS)-MLOK(135)

Description

If you’ve done the work so far of milling and drilling your 80% lower and assembling it all into the bottom half of your AR-15 (or if you just bought it already assembled, ya cheater), then add this upper assembly to your build to finish it off! This AR-15 upper assembly features a lightweight 13.5" M-Lok free-float handguard. 

In addition to its top rail, the handguard has a row of M-Lok space on the bottom and one on each side a well, which affords you a ton of space to mount tac lights, lasers, forward and vertical grips, a cheese grater, or whatever else you can think of. 

Mount this upper assembly to your lower assembly, and all you’ll have left to do is pick out your favorite backup sights and throw ‘em up on top.  And the best part is, it’s chambered in .223 Wylde, which means you can safely fire both .223 and 5.56mm NATO rounds!

AR 15 UPPER ASSEMBLY SPECS:

Gas System: Carbine-length
Barrel Profile: M4
Barrel Steel: 416R
Barrel Finish: Stainless steel
Chrome Lining: No
Muzzle Thread: 1/2×28
Chamber: .223 Wylde (accepts both .223 and 5.56mm)
Twist Rate: 1:7
Barrel Extension: M4
Gas Block Size: .750″
Gas Block Type: Low-profile
Muzzle Device: A2 Flash hider
Receiver Material: Forged 7075 T6
Receiver Type: M4
Handguard Type: 13.5″ lightweight M-Lok free float
Bolt Carrier Group Included: Yes
Bolt Steel: 9310 steel, magnetic particle inspected
Bolt Carrier Profile: Full-auto
Charging Handle Included: Yes

Benefits of the 16” Carbine-Length SS AR 15 Upper Assembly:

  • 100% legal to own and ship to your front door
  • Not considered a firearm – no FFL paperwork needed!
  • 416R stainless barrel and Freedom parts kit ensure sub-MOA accuracy
  • Prebuilt upper with gas system removes the guesswork of rifle making
  • Includes bolt carrier group, free-floated M-Lok handguard and lower parts kit

AR 15 Upper Assembly Details (Expanded):

Barrel: 16″ carbine-length stainless steel, chambered in .223 Wylde, 1:7 twist rate, .750″ low-profile gas block, 13.5″ free-float M-Lok handguard, with an A2 “birdcage” flash hider.

Upper Receiver Assembly: Forged from 7075 T6 aluminum, hard-coat anodized in black for durability, features M4 feed ramps, and are made in the USA.

Bolt Carrier Group: The bolt carrier is made from 9310 steel and has a staked gas key and black nitride finish. The bolt itself comes complete with an extractor spring and O-ring insert.  It accepts .223 Wylde, 5.56mm, and .300BLK calibers (though you should NEVER attempt to use a caliber for which your rifle is not chambered), and is magnetic particle inspected.

Charging Handle: Standard size, made from 6061 aluminum.

Please note: This build kit requires that the builder complete the 80% lower receiver themselves, but that’s the rewarding part of the experience (and the only way to build your own AR-15 without the need of an FFL transfer or serialization).

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, New Jersey, New York, Pennsylvania, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.