AR15 Pistol Kit - .300 AAC Blackout (10.5" Nitride Barrel, 1:8 Twist & 9" Slanted M-Lok Handguard)

$727.93
SKU:
300BLK-105-9MLOK-BK

Description

Check out another of the new additions to our line of .300 AAC blackout AR pistol builds.  This one gives you a 10.5" nitride-coated barrel with a 1:8 twist rate, and a 9" slanted free floating M-Lok handguard.

Like some of our other .300BLK pistol build kits, this sucker has a 10.5" barrel, which is a near-optimal length to maximize the performance of the .300BLK cartridge.  It's short enough that it'll work amazingly with a suppressor (after you check your local laws and go through all the proper procedures, of course), but not so short that you choke off its ballistic potential.

What’s Included

This kit is not a firearm. It includes an assembled upper receiver, bolt carrier group, lower parts kit, and buffer assembly with pistol brace. It does not include the component to make a firearm: A stripped lower receiver. Pair this rifle kit with an AR-15 80% lower receiver and AR-15 jig to fabricate a receiver, sold separately.

New builder? This guide explains 80 percent lowers.

300 BLK AR Pistol Kit Specs

Barreled uppers are assembled in-house before shipment.

Barrel

  • Chamber: .300 AAC Blackout
  • Contour: Heavy
  • Length: 10.5"
  • Twist Rate: 1:8
  • Gas System: Pistol
  • Muzzle Threads: 5/8x24
  • Feed Ramps: M4
  • Material: 4150 CMV
  • Finish: Parkerized
  • Process: Button Rifled
  • Lining: None
  • Extension: .30-Cal
  • Muzzle: A2 “Birdcage” Flash Hider

Handguard

  • Attachment System: 9" Slanted M-Lok
  • Finish: Type III Hardcoat Anodized (Mil-Spec)
  • Top Rail: M1913 Picatinny
  • Material: Billet 6061-T6 Aluminum
  • Attachment: Barrel Nut 

Stripped Upper Receiver

  • Profile: M4 Flattop
  • Material: Forged 7075-T6 Aluminum
  • Finish: Type III Hardcoat Anodized (Mil-Spec)

Bolt Carrier Group

  • Profile: M16/Full-Auto
  • Steel: Carpenter No. 158 (Mil-Spec)
  • Exterior: Phosphate Coating
  • Interior: Chrome-Lined
  • Gas Key: Staked, Chromed
  • Charging Handle: Included

Lower Receiver Parts

  • Buffer System: Mil-spec, Carbine
  • Pistol Brace: SB Tactical SBA3
  • Parts Kit: Mil-spec, single-stage

Receiver sold separately

No FFL or serialization is required to fabricate a receiver under federal law. However, state laws vary. Some states require serialization or have banned 80% lowers and gun-making kits. We encourage each and every builder to perform their own research about the state and federal laws that apply to them.

Made in the USA Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.