AR15 Pistol Kit - 5.56mm NATO (10.5" Nitride Barrel, 1:7 Twist & 12" Slanted M-Lok Handguard) with Fire/Safe Marked 80% Lower

$807.93
$685.00
SKU:
556-105-12MLOK-PKFL

Description

Introducing another great addition to our line of AR pistols build kits.  This particular one is chambered in 5.56mm NATO. This kit's pre-built upper assembly comes with a 10.5" nitride-coated barrel with a 1:7 twist and a 12" free floating slanted M-Lok handguard.  See below for further details.

AR-15 Pistol Kit Specs:

Barrel Length: 10.5"

Barrel Profile: A2

Gas System: Carbine-length

Barrel Steel: 4150 Chromoly Vanadium

Barrel Finish: Nitride

Chrome Lining: No

Muzzle Thread: 1/2-28

Chamber: 5.56 NATO

Twist Rate: 1:7

Barrel Extension: M4

Diameter at Gas Block: .750

Gas Block Type: Low-profile

Muzzle Device: A2 Flash Hider

Receiver Material: Forged 7075 T6

Receiver Type: M4

Handguard Type: 12” Slant End M-Lok Rail

Bolt Carrier Group Included: Yes

Bolt Steel: Carpenter 158

Bolt Carrier Profile: Full-auto

Charging Handle Included: Yes

Overall Length: 21”

AR-15 Pistol Kit Features:

  • Complete AR 15 pistol kit
  • Includes optional forged or billet 80% lower
  • Is not considered a firearm, no FFL needed
  • Includes pre-built, test-fired upper assembly
  • Quality enhanced, polished trigger kit
  • Ships straight to your front door
  • Proudly made in the U.S.A.
  • Backed by Lifetime Warranty

Barrel: Nitride-coated, 10.5”, chambered in 5.56 NATO. Made of 4150 Chromoly Vanadium. Features 1:7 twist rate, M4 barrel extension, and carbine-length gas system. Includes 12” slant M-Lok handguard, .750" diameter low profile gas block, and fluted flash can.

Upper: Mil-spec, made of forged 7075 T6 aluminum. Hard-coat anodized (Type III). Features M4 feed ramps.

Bolt: Mil-spec, shot-peened, made of Carpenter 158 steel. Gas key secured with Grade 8 fasteners, staked per mil-spec. Parkerized exterior, chrome-lined interior.

80% Lower: Pick an optional forged or billet 80% lower. All lowers include mil-spec fittings and hard-coat anodizing.

Lower Parts Kit: Includes complete, mil-spec AR-15 parts kit. Features MOE trigger guard and Enhanced Polished Trigger (EPT).

Charging handle: Standard 7075 Forged charging handle.

Please note: If completing your AR Pistol Kit using the optional 80% lower, please select an 80 lower jig from our available options.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, New Jersey, New York, Pennsylvania, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.