AR9 Pistol Kit - 9mm (10.5" Nitride Barrel, 1:10 Twist & 12" Slanted M-Lok Handguard) with Fire/Safe Marked 80% Lower

$865.43
$780.00
SKU:
9MM-105-12MLOK-PKL

Description

We're excited to bring you one of the new additions to our line of 9mm AR pistol build kits. This kit starts with an upper assembly prebuilt with a 10.5" nitride-coated barrel.  Surrounding the barrel is a 12" slanted M-Lok free floating handguard. For extra attitude, the muzzle is topped off with a fluted flash can.

You also get an upgraded lower parts kit instead of a standard one. This one comes with an upgraded trigger and a Magpul MOE grip and an enhanced, polished trigger!

Finally, you have the option to choose our 9mm 80% lower receiver. Please note, this lower's mag well is cut to accept factory and aftermarket 9mm Glock (not Colt) magazines.

AR-9 Pistol Build Kit Specs:

Barrel Length: 10.5"

Barrel Steel: 4150 CMV, heat-treated

Barrel Finish: Nitride

Muzzle Thread: 1/2x36

Chamber: 9mm Parabellum

Twist Rate: 1:10

Muzzle Device: Fluted flash can

Receiver Material: Forged 7075 T6

Receiver Type: Flat-top w/ Picatinny

Handguard Type: Slant 12” M-Lok

Bolt Carrier Group Included: Yes

Bolt Steel: Shot-peened, MPI-tested, 8620 steel

Bolt Carrier Profile: 9mm Hybrid

Charging Handle Included: Yes

AR-9 Pistol Build Kit Features:

  • Complete build kit w/ optional lower
  • Includes pre-built 9mm AR upper
  • Hybrid 9mm AR bolt carrier group
  • High-quality CMV barrel for accuracy
  • Compatible with Glock magazines
  • Features enhanced, polished trigger
  • Not considered a firearm, no FFL required
  • Proudly built in the U.S.A.
  • Backed by Lifetime Warranty

Barrel: Nitride-coated, 10.5”, chambered in 9mm Parabellum. Made of 4150 CMV steel. Heat-treated. Features 1:10 twist rate. Includes 12” slant M-Lok handguard, and A2 flash hider.

Upper: Mil-spec, made of forged 7075 T6 aluminum. Hard-coat anodized (Type III).

Bolt: Custom 9mm AR hybrid bolt carrier group. Compatible with 9mm Glock magazines. Heat-treated. Nitride finish. 8620 steel.

80% Lower: Complete with optional AR-9 80% lower. Mil-spec fittings. Type III Hardcoat anodized finish.

Lower Parts Kit: Mil-spec 9mm AR lower parts kit. Enhanced, polished trigger (EPT). Six-position buffer tube. SB Tactical Pistol Brace. Carbine buffer spring. 9mm pistol buffer.

Charging handle: Standard AR-15 charging handle.

Please note: If completing your AR-9 build using the optional 80% lower, please select an AR-15-compatible 80% jig from our available options.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, New Jersey, New York, Pennsylvania, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.