Black 80% Lower Fire/Safe Engraved (3-pack) & Elite Builder 80% Lower Jig (AR15 / AR9) with Tooling

$604.99
$439.99
SKU:
EB-15JIG_EB-TOOL-KIT_AR2180-BAL-3PK

Description

This Elite Builder 80% Lower Jig is compatible with our Forged 80% Lowers and our Premium Fire/Safe Marked Billet 80% Lowers! Other manufacturer's billet 80% lowers may be compatible with this 80% lower jig, provided their lower receiver design adheres to mil-spec specifications.

Our three-pack of lowers remains a popular choice among AR builders who plan on assembling numerous rifles and pistols. To save time, money, and guesswork, we threw together this bundle with the new Elite Builder Jig. Specifically designed to precisely machine multiple receivers, the Elite Builder is the perfect companion for easy builds.

(3) Forged 80% Lowers (“FIRE/SAVE” engraved)

The original forged and engraved 80% lower is our most popular receiver blank. Thousands of builders have finished their rifles and pistols with this receiver blank, constructed with a mil-spec fit and finish. The rear shelf and takedown pin are already completed, reducing overall machining time and ensuring your upper assembly fits perfectly.

Receiver Specs:

  • Type III Hard Anodized 
  • 100% Mil-Spec Fittings
  • Fire/Safe Marked: Yes 
  • Forged 7075-T6 Aluminum 
  • Broached Magwell 
  • Made in the USA 
  • NO FFL REQUIRED

The Elite Builder Jig w/ HSS Tooling

The Elite Builder goes further than most 80% jigs, providing hardened steel for the top plates and side plates instead of aluminum. This adds weight, stability, and ultimately guarantees tight tolerances for a perfectly cut and drilled receiver. The side plates’ drill bushings ensure your trigger, hammer, and safety pin holes are exactly where they need to be so your lower parts kit works flawlessly with the first trigger pull.

Jig Features:

  • Self-aligning jig requires no special fitting during setup 
  • Compatible with any standard AR-15 or AR-9 80% lower 
  • Black anodized finish protects against rust and corrosion 
  • Pre-drilled holes for hammer, trigger, and safety pin holes 
  • Reinforced steel template plates for completing multiple lowers

Included Tooling:

  • (1) ⅜ Drill Bit - 5” 
  • (1) 5/32 Drill Bit - 3” 
  • (1) ⅜ Short End Mill - 3” 
  • (1) 5/16 Short End Mill - 4” 
  • (1) ⅜ Long End Mill - 4”

 

*Important - This jig was designed with a drill press in mind for completing your 80% lower and is not designed to be used with a router/laminate trimmer.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.