Please note: The end mill bit is no longer included. The manufacturer, Polymer80, determined the end mill bit is not unnecessary to complete this frame.
Get super concealable with your Glock® compatible pistol build with this subcompact pistol build kit. When you're done building, your pistol will be compatible with the 3-pin gen 3 Glock® 26/27, which means you have the same insane amount of potential for customization. But the value is in the building. In the end, you'll be intimately familiar with your pistol's inner workings, because you'll have built it yourself piece by piece. This also means that should you ever want to replace any stock parts for custom aftermarket ones, you'll know exactly what to do.
PF940SC 80% Frame and Jig Kit
The Polymer80 PF940SC2™ 80% frame and jig kit features a solid, 80% complete pistol frame, as well as the necessary jig and tooling to finish your frame in under an hour.
- Glock® 26/27 Compatible frame
- Finishing Jig
- Drill bits and end mill bit
- Blank Serialization Plate
- Stainless Steel Drop-In Rear Module (RRM)
- Stainless Steel Locking Block Rail System (LBRS)
Front- & Rear-Cut Slide
The included front- and rear-cut slide allows for quick and easy completion of your 80% subcompact pistol build with a serrated, customized, high-quality slide. The serrations allow for easy handling and control, while a 416 stainless steel billet construction features machining to factory specifications.
- Heat treated to 41-44 on the Rockwell C scale
- Finished with a matte black nitride finish
- Factory internal dimensions
- Factory Glock®-compatible sight cuts
- For Gen3 pistols
Made with proper US craftsmanship, this Gen3 barrel boasts the highest level of quality and accuracy you’ll ever find in any full-sized pistol. Manufactured from heat-treated 416R stainless, this Gen3 barrel will guarantee consistent shop shot groups and accuracy when it counts most.
- Rifled with 1:10 rate of twist
- Includes 11-degree target crown
- Features nitride-treated finish
Includes Top-of-the-line Accessories
This 80% frame complete build kit includes all the accessories and components you need to complete your pistol and hit the range. This Complete Build Kit is also compatible with Gen3 Glock® 26/27 components for further customization!
- Factory-spec slide parts kit
- Factory-spec frame parts kit
- Factory-spec Gen3 Spring and rod
- Front and rear open-leaf glow sights
FREE Portable Handgun Lock Box
With your build kit, you also get a free handy lockbox to lock it up. It’s a perfect fit for your new pistol and a magazine, and it’s small enough to stash away for safekeeping. It’s included in your build kit at no extra cost! Check it out:
- Set your own combination
- Small enough to be concealed at home or in your car
- Durable steel construction and scratch-resistant
- Includes a coated steel anchor cable to attach to immovable objects
- Foam interior protects your pistol
DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.
AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.