ORDERS SHIP BY THE NEXT BUSINESS DAY!
Real time inventory.  No backorders.

Glock® 43 Compatible Pistol Build Kit with FDE Elite Slide

$599.99
SKU:
SLIDE-43-RAP3-FDE_G-43-BARREL_G43LPK_UPK-G43-BLK

Description

The debate is decrepit at this point. You know what I'm talking about. It's the old-ass "carry the biggest bullet in your sidearm with the most knockdown power you can handle" argument versus the "bullet size doesn't matter as much as where you can accurately put it" routine. But if you just want a backup or "throwaway" gun, or you're just now getting into building your own guns, then you just need something small and lightweight, that you can comfortably carry. That said, you'll need the bare minimum to still be able to say you carry a firearm for self defense. Whether you're experienced as hell and looking for a backup "baby gun," or you're a beginner of sound logic who's decided to start with something small to help you ease your way into the world of being a responsible gun owner, you're in the right place.

This build kit you add either a Polymer80 single stack or a SS80 single stack 80% frame, will turn out a Glock® 43 compatible 9mm sidearm with an FDE slide. It comes with a complete upper parts kit as well as a complete lower parts kit. All you need are the sights of your choice and of course mags and ammo. Again, the Elite Slide that comes with this kit is finished in FDE. See below for more info.

NOTE: This build kit gives you the option to select either a fluted black barrel or a stainless steel barrel with your kit.

Glock® 43 Compatible Elite Slide

  • Slide is Heat Treated from 416R Stainless Steel
  • Heat treat is RC 45-48
  • Coating is done with elite series cerkote
  • OEM internal specs
  • Fits Glock 43 and 43X
  • Works with Glock OEM poly80 and SS80 lowers
  • Uses standard OEM front and rear sights
  • Rear serration are cut deep for better traction
  • Custom cuts on the top and also the sides
  • Gen 1-4
  • 9mm

KM Tactical Upper Parts Kit for GLock® 43

  • 100% Made in the USA
  • Extractor
  • Recoil/Guide Rod Assembly
  • Firing Pin Assembly
  • Slide Cover Plate
  • Depressor Plunger
  • Firing Pin Safety/Safety Spring

Lower Parts Kit for Glock® 43

  • Connector
  • Slide Stop Release with Spring
  • Magazine Release (May be extended depending on inventory)
  • Magazine Release Spring
  • Slide LockSlide Lock Spring
  • Trigger Housing Pin
  • Trigger Housing with Ejector (may be from P80 depending on inventory)
  • Trigger Pin
  • Trigger Spring
  • Trigger with Trigger Bar

Alphawolf Glock® 43 Compatible 9mm Fluted Barrel (Black)

  • Fits Glock 43 models only
  • Designed for lead, plated, or jacketed ammunition
  • Certified, stress relieved 416 stainless steel
  • Button rifled, three stage honed bore
  • Industry recognized SBN premium coating (SBN is Salt Bath Nitride, similar to Tennifer)
  • Heat treated to RC 40-42, then SBN coating increases surface hardness to RC 60
  • Exacting tolerances allow for drop in installation
  • Fluting creates path for heat and debris to escape

Double Diamond Standard Glock® 43 Compatible Barrel (Stainless)

  • Ready to use, pre-fit, drop-in
  • No gunsmithing required
  • Precision machined from heat treated 416R stainless forgings
  • Oversized lock-up area produces greater shot-to-shot accuracy
  • Tighter than factory spec dimensions
  • Match grade broach cut rifling and target crown
  • Maximum chamber support
  • Improved feed ramp design
  • Diamond turned exterior
  • Okay to use lead, plated or jacketed bullets
  • Fits Glock Gen 1-4 (does not fit Gen5)

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

Made in the USA Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.