Polymer80 PF940SC 80% SubCompact Frame and Jig Kit (OD Green)

$239.99
$199.99
SKU:
P80-PF940SC-ODG

Description

Please note: The end mill bit is no longer included. The manufacturer, Polymer80, determined the end mill bit is not unnecessary to complete this frame. 

For your EDC, don't just carry some subcompact pistol you bought at your LGS.  Build your own, and make it a Glock® compatible subcompact by Polymer80.  This also affords you the opportunity to customize your EDC in as many ways as you can dream up.  This one's frame come in OD green.

The Polymer80 PF940SC™ 80% Subcompact Pistol Frame and Jig Kit includes an OD green 80% pistol frame and the required jig to machine it for final assembly. The PF940C gets you a factory-style grip texture.  This thing's also guaranteed to be compatible with common gen 3 components!

The provided jig also comes with the required drill bits and end mill bit. All you need to complete the kit is a Dremel or handheld router, and a hand drill!

It features an extended beavertail and thumb ledge for better control. A double-undercut trigger guard enhances comfort, allowing for a firmer grip. Lastly, engineers upgraded the 22-degree grip angle to 18 degrees. This new angle provides better recoil control and quicker follow-up! Even with a new grip angle, the PF940C is still compatible with OEM and aftermarket Glock® magazines.

Included with this Polymer80 PF940SC™ 80% Subcompact Frame and Jig Kit

  • Glock® 26/27 Compatible frame
  • Finishing Jig
  • Drill bits and end mill bit
  • Blank Serialization Plate
  • Stainless Steel Drop-In Rear Module (RRM)
  • Stainless Steel Locking Block Rail System (LBRS)

Like the style of this frame but looking for something a little bigger? Check out our other options for Polymer80 products.

Assuming is it legal for you to own a firearm, then this kit is 100% legal for you to own. Ships straight to your door, NO FFL needed.

DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit www.glock.com.

No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Pennsylvania, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.