Polymer80 PF9SS™ 80% Single Stack Frame and Jig Kit (Glock 43 Compatible)

Out of Stock
  • Fast Shipping

  • Thousands of Reviews

  • 7 Day Customer Service

  • Amazing Selection

Get a piece of the buzz in our industry that's been catching all the hype. Glock® compatible pistols have a ton of customization options. Now factor in the fact that you can start all that by building your own from individual parts! And what better way to dive off the deep end and get lost in all the possibilities than starting with a single stack frame by Polymer80 in that badass black color for your little firecracker? Your new EDC or backup gun will be your own creation...or monstrosity. It's up to you, and it's all thanks to P80!

Polymer80 has improved the original "brick" design of the Glock® with many ergonomic upgrades too. This black P80 frame's got a more aggressive grip texture for a more positive interaction with the surface of your hand. It's got both an extended beavertail and a double undercut trigger guard, so you can really get your grip high on the frame for more control, less felt recoil, and faster follow-up shots. It's also got ledges on the sides for indexing with your thumb, so you can find the same solid grip every single time.

PF9SS Features and Specs

  • Compatible with Glock® 43 Components
  • Built for the 9mm Luger Caliber
  • Comes with jig, drill bits, and end mill bit
  • Improved ergonomics and features
  • Reinforced hardened polymer
  • Factory-style grip texture
  • Picatinny/STANAG-Compliant Accessory Rail
  • Blank Serialization Plate
  • Stainless Steel Locking Block Rail System
  • Stainless Steel Rear Rail Module
  • Hardened Pins for LBRS and RRM

The PF9SS doesn't require an FFL!

Because it isn't drilled, machined, or made functional, the ATF doesn't consider the Polymer80 frame to be a firearm. The ATF describes 80% frames like these as "receiver blanks". That means the PF9SS and all our other Polymer80 Frame and Jig kits can be shipped directly to your front door with no FFL or firearms transfer paperwork required. The ATF also says it's legal to build a firearm for personal use with no FFL required. State and local firearm laws do vary. Check your state and local laws before completing your frame and building your pistol.

Looking for a FAQ or guide on the Polymer80 frame? We broke it all down here.

Here are Polymer80's instuctions.


DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither 80 Percent Lowers, a/k/a Tactical Gear Heads, LLC nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For additional genuine GLOCK, Inc. and GLOCK Ges.m.b.H products and parts visit

WARNING: Handling firearms parts and accessories can expose you to lead and other petroleum products known to the State of California to cause cancer and reproductive harm. For more information go to:

Shipping Restrictions

Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories or "assault weapons" (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website or machining a firearm. We try our best to keep our shipping page current, but laws change daily. only ships within the United States. Federal legislation dictates we cannot ship our products internationally.

Polymer Composite
GLOCK® Compatible

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, Hawaii, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.