Lifetime Warranty Lifetime Warranty Made in the USA Made in the USA FREE Shipping on $250+ Free Shipping on all orders $250+!
AR-15LowerReceivers.com – 80% Lowers, 80% Lower Jigs & AR-15 Parts

Premium Black 80% Lower Billet Fire/Safe Engraved & Easy Jig Gen 1 with Tooling

$404.95 $279.99 (You Save $124.96)

Premium Black 80% Lower Billet FireSafe Engraved & Easy Jig Gen 1 with Tooling
Premium Black 80% Lower Billet FireSafe Engraved & Easy Jig Gen 1 with Tooling
Forged

Out of stock

Out of stock

Free Shipping on all orders $325+!

SKU: AR15-BLT-BLK-Fire-Safe_EP-EJ15_EP-EJTK

Description

The all new Premium 80% Lower Fire/Safe Marked Billet has been redesigned with the builder in mind. The Premium 80% Billet has been upgraded and now offers a threaded bolt catch release hole as well as a threaded rear takedown detent hole. These advancements allow for simple and effortless install of your AR Lower parts kit components, now ending some of the most frustrating aspects of your 80% lower build. Each Premium 80% Lower Billet will also come with the needed screws and hex key for install.

(1) Premium Black Fire/Safe Marked Billet 80% Lower Receiver:

  • Color: Anodized Black
  • 100% Mil-Spec
  • Quantity: 1
  • Fire/Safe Marked: Yes
  • Billet 6061-T6 Aluminum
  • Threaded Bolt Catch Hole
  • Threaded Rear Takedown Detent Hole
  • Screws and Hex Key
  • Broached Magwell
  • Enhanced, heavy duty trigger guard
  • 100% Made in the USA
  • NO FFL REQUIRED”

80% Lower Easy Jig with Tooling:

  • Cut finish time in half
  • Can finish 20+ 80% lowers
  • Built-in drill bit depth guides
  • Each plate is individually replaceable
  • No drill press necessary (can use standard hand drill)
  • How-To videos and instruction manual

Included drill bits:

  • 3/8 drill bit (1)
  • 3/8 drill stop collar (1)
  • 5/32 drill bit (1)
  • 19/64 drill bit (1)

End mill bit included:

1/4“ solid carbide end mill bit (1) – made with super short 0.75 in flutes for ideal performance

 

Note: f your plan is to build more than 2 lowers, we recommend purchasing an end mill bit for every two lowers, and have one extra end mill bit just in case.

Check out how the Easy 80% Lower Jig compares to the others in the 80% Lower Jig Comparison chart.

How much does this jig simplify the process? Read the Easy Jig instruction manual or watch the Easy Jig how-to video.

No FFL required Made in the USA Lifetime Warranty

Shipping Restrictions
AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website.
We try our best to keep our shipping page current, but laws change daily. 

Premium Black 80% Lower Billet Fire/Safe Engraved & Easy Jig Gen 1 with Tooling

$404.95 $279.99 (You Save $124.96)

Out of stock

Out of stock

Already 2 persons shown interest.

Save For Later
Save For Later

Free Shipping on all orders $250+!

Customer Reviews

5 Based on 4 Reviews
5 ★
100% 
4
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
D
06/03/2017
Dan

best 80 lower

This lower and jig is really nice. The fit and finish is superb. The lower Matched up to my upper perfectly. The easy jig works great, just need to take your time. And really fast shipping is nice too. Extremely happy with my purchase.

A
04/16/2017
Andrew

perfect

Very well made and works perfectly.

D
04/01/2017
Daniel

great product but keep an eye on your router like they said.

Delivery was on point, and the big is way better than I expected. The lower looks fantastic. Just a word of caution, watch your router, the end mill slipper on my last cut and I killed out my trigger. Shucks, looks like I have to order a new lower. It was fun though.

A
03/07/2017
anonymous

So far so good

I haven't had a chance to actually mill out the receiver as I'm still waiting on my upper, but out of the box everything seems pretty solid. I've test fit the lower in the jig and everything lines up exactly like it should. Given the weight and thickness of the jig plates, I would imagine the claim of it being able to do at least 20 lowers is a bit of an understatement.

DON’T MISS ANOTHER DEAL ON AR-15 GEAR

Get exclusive discounts on AR-15 gear and be the first to know about new product releases.

The BEST Builds Start
with the BEST Parts

Customer Service is our passion and we are here to answer any questions you have.
317-426-6313

Shop With PRIDE

Shop With Confidence

Secure Payment

Left Menu IconMENU
Right Menu Icon