Lifetime Warranty Lifetime Warranty Made in the USA Made in the USA FREE Shipping on $250+ Free Shipping on all orders $250+! – 80% Lowers, 80% Lower Jigs & AR-15 Parts

Premium Black 80% Lowers (5-Count) Billet Fire/Safe Engraved & Easy Jig Gen 1 with Tooling

$769.95 $689.95 (You Save $80.00)

Premium Black 80% Lower Billet FireSafe Engraved (5-Pack) & Easy Jig Gen 1 with Tooling
Premium Black 80% Lower Billet FireSafe Engraved (5-Pack) & Easy Jig Gen 1 with Tooling

Out of stock

Out of stock

Free Shipping on all orders $325+!

SKU: AR15-BLT-BLK-Fire-Safe-5pk_EP-EJ15_EP-EJTK


The all new Premium 80% Lower Fire/Safe Marked Billet has been redesigned with the builder in mind. The Premium 80% Billet has been upgraded and now offers a threaded bolt catch release hole as well as a threaded rear takedown detent hole. These advancements allow for simple and effortless install of your AR Lower parts kit components, now ending some of the most frustrating aspects of your 80% lower build. Each Premium 80% Lower Billet will also come with the needed screws and hex key for install.

(5) Premium Black Fire/Safe Marked Billet 80% Lower Receiver:

  • Color: Anodized Black
  • 100% Mil-Spec
  • Quantity: 5
  • Fire/Safe Marked: Yes
  • Billet 6061-T6 Aluminum
  • Threaded Bolt Catch Hole
  • Threaded Rear Takedown Detent Hole
  • Screws and Hex Key
  • Broached Magwell
  • Enhanced, heavy duty trigger guard
  • 100% Made in the USA

80% Lower Easy Jig with Tooling:

  • Cut finish time in half
  • Can finish 20+ 80% lowers
  • Built-in drill bit depth guides
  • Each plate is individually replaceable
  • No drill press necessary (can use standard hand drill)
  • How-To videos and instruction manual

Included drill bits:

  • 3/8 drill bit (1)
  • 3/8 drill stop collar (1)
  • 5/32 drill bit (1)
  • 19/64 drill bit (1)

End mill bit included:

1/4“ solid carbide end mill bit (1) – made with super short 0.75 in flutes for ideal performance

Note: If your plan is to build more than 2 lowers, we recommend purchasing an end mill bit for every two lowers, and have one extra end mill bit just in case.

Check out how the Easy 80% Lower Jig compares to the others in the 80% Lower Jig Comparison chart.

How much does this jig simplify the process? Read the Easy Jig instruction manual or watch the Easy Jig how-to video.

No FFL required Made in the USA Lifetime Warranty

Shipping Restrictions only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website.
We try our best to keep our shipping page current, but laws change daily. 

Premium Black 80% Lowers (5-Count) Billet Fire/Safe Engraved & Easy Jig Gen 1 with Tooling

$769.95 $689.95 (You Save $80.00)

Out of stock

Out of stock

Save For Later
Save For Later

Free Shipping on all orders $250+!

Customer Reviews

4.7 Based on 3 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Write a Review

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
Big A.

Excellant End Results!

The billet receivers have the trigger gaurd built in and is designed for fingers wearing gloves. The easy jig is Rock Solid and practically impossible to mess up as long as you watch the video and can follow directions. All of the ones we have done are perfect! Very good feeling knowing you did your very own lower! Don't hesitate these are outstanding, good luck and happy shooting!


1st time 80% project

After assembling about 22 AR, I decided to try this. I bought a Dewalt router and extra end mill bit. The instructions are very concise and easy to follow. I just completed the trigger pocket milling process last night and plan to complete the lower next weekend. The billet lowers are more expensive than cast/forged and worth the cost. I plan to do more.


Billet Lowers and milling kit

After a small issue of product availability AR-15LowerReceivers made good with me. There are not too many internet companies that will do that for customers. The billet lowers were of great quality and the milling kit is better than what I was expecting it to be. The milling kit is packaged very nice in its own box for re-use. I have been too impressed with this company not to be a return customer.


Get exclusive discounts on AR-15 gear and be the first to know about new product releases.

The BEST Builds Start
with the BEST Parts

Customer Service is our passion and we are here to answer any questions you have.
(888) 581-0750

Shop With PRIDE

Shop With Confidence

Secure Payment