Stealth Arms Phantom 1911 80% Jig

$250.00
$199.95
SKU:
phantom-jig

Description

The 1911 Jig Overview:

The 1911 Phantom Jig consists of three main pieces; 1 cutting “car” and 2 long side plates. Carbides cutters are used to remove the material from the frame, the Phantom Jig is the only jig that makes use of these powerful cutters. The carbide cutters will be used to cut the slide as well as the barrel set in the frame.

The two long side plates serve as a guide for the cutting “car” to do its job. When the frame is installed in between the two side plates, the cutting car is then placed on top of your two longer side plates, at this point, the carbide cutter will be facing towards your 1911 frame side rail. To cut the rail, simply begin by working the carbide cutter back and forth.  It's more of a manual task, but it's the best method for cutting these rails. The carbide cutter protrudes slightly and shaves layer after layer until your rail is complete, at that point you would flip the frame over and finish the other side.

BENEFITS OF THE 1911 PHANTOM JIG:

  • The quickest way to finish a 1911 frame
  • No need for a milling machine
  • All necessary drill bits included
  • Carbide cutters come installed
  • YouTube video tutorials available onlone
  • Compatible with all 1911 Stealth Arms frames
  • Made in the US (OHIO)

Special Notes:

  • If using a steel 1911 frame we recommend purchasing some extra carbide cutters as steel is a tough metal than aluminum.
  • We recommend every individual to do their own research regarding building your own firearm. We are not lawyers so please educate yourself on your state and local laws.
No FFL required  Made in the USA  Lifetime Warranty

Shipping Restrictions

AR-15Lowerreceivers.com only ships within the United States. Federal legislation dictates we cannot ship our products internationally. Shipping of various parts and/or accessories are prohibited to states and locales (ie New Jersey, California, New York, etc…) with restrictions against certain parts and/or accessories (i.e. states with high-capacity magazine restrictions, manufacturing of semi-automatic weapons, etc..). It is your responsibility to be aware of your local firearms laws before purchasing from our website. We try our best to keep our shipping page current, but laws change daily.

We are a national retailer of individual components and not all products depicted on this website are legal in every state. Shipping of various products found on this website are prohibited to some states (such as California, Connecticut, District of Columbia, New Jersey, New York, Rhode Island, and Washington). The information, pictures, text or products presented on this website are not a representation by us, and should not be understood by you, that any product or completed firearm is legal to assemble or own in your state of residence. We encourage each and every builder to perform their own research about the state and federal laws that apply to them. It is your responsibility to understand the law and we encourage you to consult with an attorney or your local ATF representative.